DJ Control is a software DJ controller that emulates real Hercules DJ Console RMX hardware MIDI controller by using MIDI over WiFi connection.

Remember that this application is not a player, it is a controller for your DJing applications installed on your computer or laptop so you can control it wirelessly using this application.

MAC usage instructions:
Download DSMI server for MAC from here:

Start the DSMI server and then run your DJing program.

Linux usage instructions:
Download DSMI server for Linux from here:

Start the DSMI server and then run your DJing program.

Windows usage instructions:
First download and install "MIDI Yoke" MIDI driver from here:
or here:

Windows 7 users: remember to turn off UAC prior to installation of "MIDI Yoke"

Restart your computer for the MIDI Yoke driver to be active.

Download DSMI server for Windows from here:

Unpack and start the DSMI server (DSMIDIWiFi.EXE).

Select "In From MIDI Yoke: 2" as input port and "Out To MIDI Yoke: 1" as output port in the DSMI server window.

Run your DJing program.

If MIDI Yoke does not work for you try LoopBe30, Maple Midi Cable or loopMIDI:

DJing program configuration instructions:
In the DJing program's settings (remote or controller section) select "Hercules DJ Console RMX" as controller. If this controller does not exist in the list than you need to import MIDI profile that you can download from here:

For Traktor Pro/Duo:

For Traktor 3:

For Traktor 2:

For UltraMixer (instructions):

For Virtual DJ 5 (generic MIDI profile):
Load this file in VDJ Preferences (Remote section) right click on General MIDI, select config then Load. Close the window and on General MIDI image - right click... activate.
Thanks to David R. for this file!

For Virtual DJ 6/7: (put each of this 2 files in ../Documents/VirtualDJ/Devices and ../Documents/VirtualDJ/Mappers respectivly. Create the Devices folder if it doesn't exist. Then start VDJ, go to Preferences (Mappers), rescan for new hardware and select DJ Control device from the list.)
Thanks to Marian-Mina Mihai (lalu) for this files!

For Mixx: The DJ Console RMX is in the list (starting from version 1.8).

Also, if it's not automatically detected and there is a setting for this, set manually input MIDI port to the "DSMIDIWIFI-out" MIDI port (or "In From MIDI Yoke: 1" in Windows). Traktor does this automatically and in Mixx you first choose this MIDI port, select Enable and then select the controller type.

Here is an alternative guide by a user using Windows 7 and Vitrual DJ 7:
David's instruction guide...

Device configuration instructions:
Your phone (or tablet/pad) must be connected to the same WiFi network as your computer or laptop you are using. Firewall must be disabled or rule exception should be added to be able to communicate freely with the computer. You don't have to configure anything in the DJ Control application except to check if MIDI over WiFi is enabled in settings. WiFi connection must always be active for this controller to work. If you don't have WiFi infrastructure (router) you can connect to your computer or laptop by creating ad-hoc (computer-to-computer) connection or with software WiFi AP mode (if your device supports this). Search the net for tutorials on how you can do this.

Another possibility to use alternative connections like USB (wired) or Bluetooth is by using a quality tethering app. Only tethering apps that support direct UDP connections can work with DJ Control.

It should work now, and if not read the document again and see if you've missed something.

Happy DJing ;)

Follow @Borce_BT